ChinaconcentricIfboard(allnaveniah)
Characteristics of china coaxial plywood (all china veneer)
" on the surfaceChina” is a deciduous broad-leaved tree of the linden family, genus linden.
WarmChewypaleyellowish whitein,Clean and beautiful with few knotsgrain.
TextureBecause it is fine and smooth, it is easy to paint and has a beautiful finish.Raise itcan be done
polishingA smooth finish without having toYou can get it.
Shina co-core plywood is made by using china as the core material.
China veneerOrdinary plywood with lauan core such ascomparedThe end of the wood is beautifulThe feature is that.
Fittings, furniture, etc.As a surface finishing materialThere are many cases where it is used unpainted.It's the material.
In addition, it is easy to process because it has less hangnails and is soft.
It is also a popular product as plywood for cutting dies and blade dies.
What is plywood (veneer)?
circleThickThinhollow board (Single board)ofwoodfiber direction ofAlternately stack them one by one vertically → horizontally → vertically,ContactAdhesiveBecause it is manufactured by crimping using
Solid wooddegreeYoRimoLess expansion and contraction, strong and easy to processIt is characterized by
If you drive a screw or nail into the end of the wood (the cross section on the side of the board), the screw or nail will get stuck between the thin boards that are pasted together.Push the boards apart
Peel offLeshiMaikotoThere is a plywoodIt is not suitable for driving screws or nails into the wood end.
Product specifications
standard
Composition/cross sectiontrue
Shina coaxial plywood (all-shina veneer) is a product made by laminating thin boards together in layers, as shown in the photo below.
The layer of veneer and core materialPLY, and the number of layers isNumber of PLYsIt is called.
*As shown in the photo below7 layers = 7PLY
*The above configuration is a standard configuration.
The core wood species and number of PLY may vary depending on the material used.
Quality
Our products are manufactured based on the Japanese Agricultural Standards (JAS).
Safety lowformaldehyde plywood
Contained in adhesives, it is said to be one of the causes of sick building syndrome.Formaldehyde.
We prioritize the health of our customers who use our products.
According to JAS standardLowest formaldehyde emissionIt is said that『F☆☆☆☆ (F Four Star)” is
provenWe manufacture products.
Board surfacequality standards
surface
The surface isSander finished (polished)With a fine and smooth textureeasy to paintFor,beautifully finishedGerucan do.
Taking advantage of the warm, elegant texture and beautiful grain of Chinese china, it is often used as a surface finishing material without painting.
・Same as the surfaceSander finished (polished)
・There are many veneer joints compared to the surface, and there may be a difference in the color of the veneer (white/red).
・There may be more knots than the surface.
Back side
Precautions for use
■If you use paints called "natural paints" that are made mainly from animal, plant, or mineral resources.
Due to high penetration and long drying time, please refrain from using it as it may cause poor adhesion or color unevenness.
■Avoid using the product outdoors, or even indoors in hot, humid places or where it may be exposed to water.
■As it is a natural wood, there are individual differences in grain, color, number of knots, etc.
■Photos are for illustrative purposes only. Depending on your monitor or screen environment, the colors and textures displayed may differ from the actual colors.
Construction example
.jpg)
.jpg)